云南11选5

山东晟亚石材云南11选5山东锈石厂欢迎您的光临!

全国咨询电话
18946249118 15214444313
联系我们 CONTACT US
山东晟亚石材云南11选5
联系人:刘经理

电话:18946249118 / 15214444313


地址:济宁市汶上县白石镇鑫亚石材厂
常见问题
当前位置:云南11选5> 云南11选5>常见问题>怎么才能提高锈石的抗压能力?
怎么才能提高锈石的抗压能力?
来源:http://www.bizzyball.com 日期:2019-07-28 发布人:admin
 浏览量:
  众所周知,山东锈石的生产是一个严格的过程,所以山东锈石也需要检查。现在让我们来看看山东的锈石,看看在检查中应该注意什么,这也将有助于我们的生活和学习。
  As we all know, the production of Shandong rust stone is a strict process, so Shandong rust stone also needs to be inspected. Now let's take a look at the rust in Shandong Province and see what we should pay attention to in the inspection. It will also help our life and learning.
  山东锈石是由多种矿物成分组成的。从山东锈石的微观结构看,它由许多孔洞和细裂纹组成。部分山东锈病经“背网”加固后不满足合格要求,故可对山东锈病进行表面渗透加固。所谓渗透加固方法是让渗透性强的环氧树脂胶液渗透山东锈石通过山东锈石本身的漏洞和裂缝,然后进入干燥处理使山东锈石成为一个统一的整体,以提高山东锈石的力量。
  Shandong rust stone is composed of many mineral components. From the microscopic structure of Shandong rust stone, it is composed of many holes and fine cracks. Some of Shandong rust can not meet the qualified requirements after reinforcement by "back net", so it can be strengthened by surface penetration. The so-called penetration reinforcement method is to let the penetrating epoxy resin glue penetrate Shandong rust stone through the loopholes and cracks of Shandong rust stone itself, and then enter the drying treatment to make Shandong rust stone become a unified whole, so as to enhance the strength of Shandong rust stone.
  山东锈石渗透加固的质量与材料的选择有着重要的关系。在选择环氧树脂时,选择加固效果好、固化时间长、渗透性高的环氧树脂,一般选用低粘度的环氧树脂。由于凝结时间长,所以具有良好的渗透性。所以它经常被使用。对于山东锈石的加固要求不仅在渗透性上,而且在加固温度上。一般用于表面穿透加固的环氧树脂,高温固化温度为25℃,低温固化温度为10-15℃,室温弯曲固化时间为24h。
山东锈石厂
  The quality of penetration reinforcement of rust stone in Shandong Province is closely related to the selection of materials. When choosing epoxy resin, epoxy resin with good reinforcement effect, long curing time and high permeability is chosen, and low viscosity epoxy resin is generally chosen. Because of the long condensation time, it has good permeability. So it is often used. The reinforcement of rust stones in Shandong Province requires not only permeability, but also reinforcement temperature. Epoxy resin is generally used for surface penetration reinforcement. The curing temperature at high temperature is 25 C, the curing temperature at low temperature is 10 - 15 C, and the curing time at room temperature is 24 h.
  以上就是探讨如何提高山东锈石的抗压性,总结一下,是关于山东锈石石材的保养方法。虽然问题不是很大,但随着时间的推移,影响会更大。温馨提醒您,定期保养山东锈石是相当必要的。通过以上山东锈石的相关知识,不知道您知道多少,不知道不要紧,您可以联系我们,您可以继续关注我们的网站,我们真诚的期待与您的合作!
  The above is to explore how to improve the compressive resistance of Shandong rust stone, summarize, is about the maintenance methods of Shandong rust stone. Although the problem is not very big, with the passage of time, the impact will be greater. Warmly remind you that regular maintenance of Shandong rust is quite necessary. Through the above Shandong rust stone related knowledge, do not know how much you know, do not know that it does not matter, you can contact us, you can continue to pay attention to our website, we sincerely look forward to working with you!
相关推荐
云南11选5走势图 云南11选5免费计划软件 云南11选5开奖结果 云南11选5 云南11选5 云南11选5走势图 大赢家棋牌APP下载 云南11选5走势图 云南11选5 云南11选5